201 Main Street Ste 600 Fort Worth, TX 76102 (817) 665-8828 info@procotexas.com

Contractor Insurance in DFW: What Fort Worth Contractors Actually Need to Carry

Smiling contractor in a hard hat and safety vest looking up from a job site

If you run a crew in Fort Worth or anywhere around the metroplex, contractor insurance DFW customers and general contractors expect you to carry is not one policy. It is a handful of coverages that each cover a different kind of problem, and the gaps between them are where contractors get hurt.

I started ProCo because I was tired of watching people get sold policies they did not understand. Contractors see that more than most. A cheap quote comes in, a certificate gets emailed to a client, and nobody looks closely at what is actually on the policy until a claim lands. This guide is the plain-English version of what a DFW contractor should know before that happens.

One note first. Every policy and every trade is different, and a roofer’s risk is not an electrician’s risk. Use this to learn the right questions, then check your own policy and talk to an agent who will look at how you actually work.

Why contractors carry more risk than most businesses

A contractor does work on someone else’s property, with tools that walk off, in vehicles that spend all day on DFW highways, with employees and subcontractors who can get hurt. Then, after the job is finished, the work still sits there for years and can still cause a claim. Very few businesses have that many moving parts in one day.

North Texas adds its own twists. Construction around DFW has been busy for years, which means more crews, more job sites and more vehicles on the road. Hail and wind can damage trucks, materials and unfinished work. And summer heat puts a real strain on anyone working outside.

The core coverages every DFW contractor should understand

The table below is the short version. Not every contractor needs every line, but you should know why you do or do not carry each one.

Coverage What it protects A question to ask
General liability Injury to other people and damage to their property caused by your work, including problems that show up after the job is done Does it include completed operations, and are my limits what my contracts require?
Commercial auto Vehicles used for the business, including trucks, vans and trailers Is my work truck on a business policy, and who is allowed to drive it?
Workers compensation Medical costs and lost wages when an employee is hurt on the job Do I carry it, and do my subcontractors carry it too?
Tools and equipment Your tools, equipment and sometimes rented gear, on the job site and in the truck Does my policy cover theft from a locked truck or a job site?
Builders risk A structure while it is being built, plus materials on site Who is responsible for insuring this job, me or the owner?
Professional liability Claims about mistakes in design, plans or advice Do I do any design-build or give recommendations that could be blamed?
Umbrella Extra liability limits on top of your general liability and auto Do my contracts or my own comfort level call for higher limits?

Notice how every row is about a different part of the business. That is the point. One policy does not cover it all, and a gap in one row will not be fixed by a strong policy in another.

General liability: the one clients ask to see first

General liability is the policy most clients and general contractors ask for before you ever pick up a tool. It generally pays when your work injures someone who is not your employee, or damages someone else’s property. A ladder falls on a homeowner’s car. A leak you missed ruins a ceiling after you have left. A visitor trips over your equipment.

Two things trip contractors up here. First, general liability is not built to pay for your own faulty work. It is built to pay for the damage that work causes to other people and their property. Second, it does not cover your own employees getting hurt. That is workers compensation. Ask your agent to explain the difference between the two, and ask what your policy says about completed operations, which covers claims that come up after the job is done.

Workers compensation in Texas: the choice that is not really a choice

Texas is unusual because most private employers can choose whether to carry workers compensation. It is not required for most private businesses. That sounds like a break, but it does not make the risk go away. Employers without coverage can lose some of the legal defenses that protect covered employers, and an injured worker can sue directly.

For contractors there is another layer. Many general contractors and property owners require workers compensation from their subcontractors, and public construction projects commonly require it. If you cannot show proof of coverage, you may not get the job at all. So even where the law gives you a choice, the contract often does not.

If you use subcontractors, find out whether they carry their own coverage. If they do not, the question of who pays when one of them is hurt can land on you.

Commercial auto: personal auto usually is not enough

A truck loaded with tools, ladders and materials is not a personal vehicle, even if you pay for it yourself. Personal auto policies often limit or exclude business use, especially when the vehicle is used to carry equipment or make deliveries or has employees driving it. A claim that falls into that gap can leave you paying for the damage and the repairs yourself.

Ask these questions: Who is listed as a driver? Are employees covered when they drive? Does the policy cover vehicles I rent or that employees use for work errands, which is often called hired and non-owned coverage? And what happens to the tools inside if the vehicle is stolen?

Tools and equipment: the gap people forget

Contractors lose tools to theft far more often than most people expect, and general liability does not pay for them. Coverage for tools and equipment, often called an inland marine or equipment floater, is designed for items that move from job to job. Look at the limit, the deductible, whether theft from a vehicle or job site is included, and whether rented equipment is covered.

Hail adds another reason to look at this. A stack of materials or a trailer parked outside during a DFW storm can take a hit that no one planned for.

What changes when you move from residential to commercial jobs

A lot of contractors start on residential work and move into commercial work as they grow. That jump often changes the insurance you need. Commercial clients and general contractors commonly ask for higher liability limits, a certificate of insurance, and wording that names them as an additional insured. Some also ask for a waiver of subrogation, which limits your insurer’s right to go after them after a claim.

None of that is hard to get when you ask early. It is hard to get when a client sends a contract on Friday and wants the paperwork Monday. If you are planning to bid on bigger jobs, talk to your agent before the bid, not after you win it.

A walk-through: what happens after a job-site accident

Here is a made-up example, not a real client. A crew is replacing siding on a two-story home in a DFW suburb. A ladder slips, falls across the driveway and dents a neighbor’s truck, and a worker twists an ankle trying to catch it. That one afternoon touches three different coverages.

  • The neighbor’s truck is a general liability claim, because your work damaged someone else’s property.
  • The worker’s ankle is a workers compensation claim, if you carry it. If you do not, the medical bills and missed wages become your problem.
  • If the ladder was strapped to your truck and the truck was in an accident on the way, that is a commercial auto question.

Three different policies, one afternoon. That is why a contractor cannot judge insurance by looking at a single line on a quote.

Certificates and additional insured: what they actually mean

A certificate of insurance is a summary. It shows the carrier, the policy number, the limits and the dates. It does not change the policy. If a client wants to be protected under your policy, they will ask to be named as an additional insured, and that requires an endorsement on the policy itself, not just a certificate.

This is a spot where assumptions get expensive. A certificate that lists a client as holder is not the same as an endorsement that names them as additional insured. If the contract asks for the second one, make sure the policy actually has it. Your agent can check the wording before you send anything out.

Contractor in a safety vest checking a tablet on a construction site
Track your jobs, crews and equipment, then check each one against your coverage.

How much liability is enough?

There is no single right number, and I would be guessing if I gave you one. The better way to think about it is in three steps. Start with what your contracts require, because that is the minimum you have to show. Then think about the size of the jobs you do, since a bigger job can cause a bigger loss. Finally, look at what you could not afford to pay out of your own pocket.

If your general liability limit falls short of what you would be exposed to, an umbrella policy can add limits above your general liability and commercial auto without rewriting everything underneath. Your agent can show you what that looks like for your trade.

DFW weather and your equipment

Hail season is real here, and trucks, trailers and stored materials do not get a roof. Wind can scatter materials or damage unfinished work. If you keep inventory or equipment in a yard, a shop or a storage unit, ask how it is covered and what the deductible is. A claim for a hail-damaged work truck is a commercial auto question. A claim for materials sitting on a job site may fall under builders risk or a separate policy.

Heat matters too, in a different way. Hot summers put crews at higher risk of heat illness, and a good safety routine helps you avoid claims in the first place. Water, shade and breaks are cheap, and they protect your people and your premiums.

When your crew grows

Hiring your first employee changes your insurance. Payroll goes up, workers compensation becomes a bigger question, and your vehicles may have new drivers. Adding a second truck, a trailer or a piece of heavy equipment changes the policy again. Tell your agent when these things happen instead of waiting for renewal. It is a short phone call, and it keeps your coverage matching your business.

What our clients say

★★★★★

“I have been trying to find new insurance and nobody would contact me back. … I ended up contacting ProCo and got ahold of Cameron and he sat with me on the phone and told me what my options were, and helped me pick the best one with a good balance between rates and coverages.”

– Cameron L.

★★★★★

“…From start to finish, the process was smooth, and the team was incredibly knowledgeable. They took the time to understand my needs and found a policy that perfectly matched what I was looking for at a competitive rate.”

– Jacoby

What I would do this week

You do not have to fix everything at once. Pull out your current policies and your last certificate of insurance. Write down what you carry, what the limits are, and when each policy renews. Then write down what your biggest contract or client asks for and see whether the two match.

Next, look at your vehicles and your tools. Make a simple list of what you own, what it is worth and where it is kept, and check that each item is on a policy. Finally, ask yourself honestly whether your revenue, payroll and job descriptions on the policy still match how the business runs today.

If anything on that list does not match, you have a short conversation to have with your agent. It costs nothing to ask, and it is much cheaper to fix a gap on a quiet Tuesday than after a claim.

Mistakes I see DFW contractors make

Buying on price alone

A low premium that leaves out completed operations, or has limits that are too small for your contracts, does not save you anything. Compare what is covered, not just what it costs.

Describing the work wrong

Insurers rate a contractor by trade and by what the crew actually does. If your application understates the work, say you do mostly interior work when you also do roofing, a claim or an audit can turn into a problem. Be accurate and update it when the work changes.

Ignoring subcontractors

Hiring a sub who has no coverage can make you the next target after an accident. Ask for their certificate of insurance before they start, and keep a copy.

Letting the paperwork lapse

A policy that expires in the middle of a job can break a contract and leave you uncovered. Put renewal dates on your calendar, and ask your agent to remind you.

Never updating revenue and payroll

Many commercial policies are priced from your estimated revenue and payroll, and the insurer can audit them. If your business grew and you never told anyone, you can be billed for the difference when the audit comes.

Questions to ask your agent about contractor insurance in DFW

  1. Does my general liability include completed operations, and are my limits right for my contracts?
  2. Is my work truck on a commercial auto policy, and who is covered to drive it?
  3. Do I carry workers compensation, and do my subcontractors carry their own?
  4. Are my tools and equipment covered on the job site and in the vehicle?
  5. Do I need builders risk or an umbrella for the jobs I am bidding on?
  6. Can you issue a certificate of insurance and an additional insured endorsement quickly when a client asks?
  7. When did my revenue and payroll figures last get updated?

How ProCo helps DFW contractors

ProCo is an independent insurance agency based in Fort Worth, which means we are not tied to one company. We can look at the way your business really works, explain your current coverage in plain English, and compare options from different carriers so you can see the trade-offs. No pressure and no jargon.

To see how this fits your trade, start with our Contractors Insurance page. You can also look at Commercial Auto, Workers Compensation or our full Commercial Insurance options.

Frequently asked questions

Do contractors need workers compensation in Texas?

Most private employers can choose whether to carry it, but going without can cost you legal protections, and many clients and public projects require proof of coverage. Ask your agent how it applies to your situation.

Is general liability enough for a contractor?

Usually not on its own. It does not cover your own employees, your vehicles, or your tools, and it is not built to pay for your own faulty work. Most contractors need several coverages working together.

What is a certificate of insurance?

It is a one-page summary of your coverage that you give to a client or general contractor as proof you are insured. Your agent can usually issue one quickly.

Does my personal auto policy cover my work truck?

Often not when the vehicle is used for business, especially to carry equipment or with employees driving. Check the wording or ask your agent before you rely on it.

Cameron Moore, Co-Founder/President, ProCo Insurance, Fort Worth, TX

This article is general information, not a guarantee of coverage. Your own policy language controls what is and is not covered.

Ready To Review Your Coverage?

Get your free quote at procotexas.com/quotes/ or talk to us directly.

Independent agency in Fort Worth. Plain-English answers. No pressure.

Call Now: (817) 665-8828Get Your Free Quote

Email: info@procotexas.com
Office: 201 Main Street Ste 600, Fort Worth, TX 76102